Premium ammunition conditioning system
Control the climate. Own the shot.
Active heating, cooling, humidity discipline, live telemetry, and signed factory QA for shooters who refuse to let sun, pickup heat, cold wind, or damp air decide the starting condition of their ammunition.
The money line
Load development is built on repeatability. ARMAX brings that same standard to the ammunition compartment before the round ever reaches the chamber.
When other shooters are leaving match ammo to bake in the pickup, sit in cold wind, or collect moisture between stages, ARMAX gives you a chosen temperature, a managed humidity ceiling, live risk status, and a repeatable staging ritual that feels like it belongs next to high-end rifles and optics.
Dual mission
ARMAX is both a match-day conditioner and a weather simulator: hold a proven load in its winning window, then rehearse heat, cold, dry air, and humidity before you travel.
When a load has already shown the velocity, group, and point-of-impact behavior you trust, ARMAX lets you stage ammunition in that same temperature and humidity window instead of letting the range environment rewrite the starting condition.
Set ARMAX to a forecast profile, desert heat profile, winter profile, or humid morning profile, then test how your built ammunition behaves before travel, before the hunt, or before a high-stakes match day.
Field advantage
From the app, the shooter chooses the environment: target temperature, humidity ceiling, and operating profile. ARMAX turns that command into a controlled microclimate inside the case, so the ammunition is conditioned before the world outside gets a vote.
Temperature setpoints range from 5°C to 40°C. The exact setpoint and stabilization time achievable in use depend on ambient weather, direct sun, airflow, lid openings, ammunition quantity, and available power.
Set 40°C to simulate ammunition exposed to desert or vehicle heat. ARMAX can heat up to 40°C; the achievable setpoint and stabilization time depend on ambient conditions, direct sun, airflow, lid openings, ammunition quantity, and available power.
Command-grade control
The premium impression comes from command: temperature, humidity, power, telemetry, updates, calibration, and proof all answering to the shooter.
Choose the temperature and maximum humidity profile that matches your day, discipline, or validation routine.
Air temperature, humidity, battery, charging state, TEC, fan, and sample history stay right in front of you.
Active heating, cooling, and airflow push the compartment toward the selected microclimate.
Condensation risk, recovery, diagnostic logs, and session reports turn the routine into usable data.
Power and travel
ARMAX is built for the way shooters actually move: home reloading bench, pickup, shooting range, remote camp, solar setup, external battery, and fly-in competition or hunt logistics.
Run autonomously on battery for up to 8 hours, depending on ambient conditions, setpoint, heating or cooling demand, and lid-open behavior.
Pre-condition ammunition at home, charge from mains power, then keep the system alive from 12V/24V vehicle power on the way to the range.
For long days and remote sessions, ARMAX can be supported by solar panels and external battery packs so the case stays useful beyond the parking lot.
ARMAX is built for air travel from the power system up: UN38.3 transport compliance, battery capacity kept inside airline limits, rapid battery removal from the case, and carry-on handling designed for confident airport movement.
For fly-in matches and destination hunts, ARMAX gives the shooter a clean travel story: certified battery transport documentation, removable battery workflow, and the confidence to move through the airport without wondering if the case can come with them.
Payload and travel footprint
The climate-controlled heating and cooling tray is about 10 1/2" x 6 1/2" x 6" (264 x 164 x 150 mm), with room for cartridges up to .50 cal.
For transport, the numbers that matter are on the outside: 18" x 11 1/2" x 12 1/2" (456 x 290 x 318 mm) and about 18 lb empty (8 kg), before ammunition. Payload is defined by the climate-controlled tray, built to carry serious cartridges up to .50 cal.
Premium proof
The touchscreen, serialized records, firmware workflow, diagnostic logs, and signed QA report make ARMAX feel like the missing hard good in a serious shooter's kit.
App experience
The instant command view: temperature, humidity, risk, battery, mode, TEC, fan, and recent samples in one hard-to-ignore screen.
Factory confidence
Before shipment, the operator connects the unit, verifies identity and firmware, reviews live telemetry, checks actuators, runs the guided test wizard, records calibration data, and signs the final report.
Reserve a unit with QA proof
Proof and testing
The complete ARMAX validation package will be published after the F-Class World Championships at the National Shooting Centre in Bisley, England, conclude on 16 August 2026.
The published material will include video clips covering the following tests, together with detailed documentation of the test setup, environmental conditions, procedures, and complete telemetry.
Starting from ambient conditions, ARMAX will be set to a defined temperature and humidity profile. The video will show the response of the ammunition compartment and the stabilization curve from the initial state to the target range.
The case will be opened and rounds removed as they would be during a competition string. After the lid is closed, the video and telemetry will show the recovery toward the selected target range.
Desert heat, winter-match, and humid-morning profiles will demonstrate how ARMAX creates controlled conditions for ammunition testing before travel or competition.
Cooling, heating, hold mode, fan demand, AC operation, and 12 V/24 V vehicle power will be documented, including battery draw and operating time.
The documentation will include test conditions and protocols, ambient and target values, target-versus-actual charts, temperature and relative-humidity trends, condensation-risk status, lid-open recovery curves, power-draw and runtime tables, complete telemetry exports, app and factory-calibration screenshots, and the signed factory QA report.
Why it matters
| Need | Passive case | Cooler workaround | ARMAX |
|---|---|---|---|
| Temperature | Ambient owns it | Crude and hidden | Active target + live command |
| Humidity | Unknown | Can trap moisture | Maximum RH target + visibility |
| Risk signal | No signal | Hope and feel | Condensation risk shown |
| Documentation | None | None built in | Logs + session reports |
The premium promise
Stage ammunition in the temperature and humidity window you chose before the first round leaves the case.
Pickup, reloading bench, firing line, shade, camp, or competition stage: the case keeps the condition visible while the day changes around you.
Pair session reports and diagnostic logs with your chronograph notes, groups, and match prep instead of relying on memory.
About the founder
Milan Veljkovic, Founder, Owner & Engineering Lead, holds a master’s degree in Automation and Robotics and is completing his doctoral studies.
For 18 years, he has led an engineering company delivering advanced building climate systems, automation, and energy-performance optimization for technically demanding five-star hotels.
A Serbian National Champion in F/TR long-range rifle shooting, Milan created the original ARMAX concept to solve a problem he understood firsthand.
The first prototype was built for his own competition ammunition, then field-tested for six months by one of Europe’s leading long-range competitors. Major design refinements were driven directly by that shooter’s feedback.
Today, ARMAX is developed by an experienced multidisciplinary team of automation, electronics, mechanical, and product-development engineers.
A competition-driven system, engineered from the ground up.
Meet the founder→Founders' preorder · First delivery Christmas 2026
The first units are scheduled to ship for Christmas 2026. Reserve during the Founders' Preorder and start the 2027 season with ammunition climate under command.
Shipping is not included in the price and will be calculated at checkout. Import duties, taxes, brokerage, customs or other destination charges may apply and are not included in the price.
Founders' preorder ends September 30, 2026. Built for the shooter who plans the next season before the current one is over.
First delivery · Christmas 2026FAQ
ARMAX turns ammunition climate into a controlled part of match prep. It actively heats, cools, manages humidity targets, shows live telemetry, and keeps the starting condition of your rounds visible before they ever leave the case.
Because precision shooting is built on repeatability. If the rifle, optic, load, and chronograph work are treated like serious variables, the ammunition environment should not be left to pickup heat, cold wind, sun, damp air, or guesswork.
No. It has a dual mission: keep proven ammunition in a chosen condition on match day, then simulate heat, cold, dry air, and humid mornings before travel so you can see how a built load behaves before the weather gets the first vote.
Set target temperature, humidity ceiling, and operating profile, then view battery state, TEC and fan behavior, condensation risk, live samples, diagnostic logs, session reports, firmware workflow, and setup support instead of guessing what the case is doing.
ARMAX is built around the way shooters move: home bench, vehicle power, range line, remote sessions, solar or external battery support, and fly-in match or hunt logistics with UN38.3-ready removable battery architecture.
The climate-controlled tray is about 10 1/2" x 6 1/2" x 6" (264 x 164 x 150 mm), with room for cartridges up to .50 cal. The external transport footprint is about 18" x 11 1/2" x 12 1/2" (456 x 290 x 318 mm), and the device is about 18 lb empty (8 kg), before ammunition.
The validation documentation should show target vs. actual charts, humidity trends, condensation risk state, lid-open recovery, runtime behavior, app screenshots, factory calibrator screenshots, session exports, and signed QA records.
Precision rifle competitors, long-range hunters, and range validation teams who already spend serious money on rifles, optics, handloads, data, travel, and match prep, and want the ammunition environment to match that standard.
Use the preorder form to claim a build position. Current market pricing, VAT or sales-tax treatment, shipping terms, and the September 30, 2026 Founders' Preorder deadline are shown above. No payment is taken today, and first delivery is scheduled for Christmas 2026.
